Use cases / Dewatering

Use case · Dewatering · Construction

Dewatering pumps you can see and control from anywhere

Pijpers Bronbemalingen keeps building pits dry for contractors. Together with implementation partner FrontControl, iotz.io connected their electric wellpoint pumps to digital dashboards that are available anywhere. The Pijpers team now sees every connected pump and every project, changes pump settings and starts or stops a pump without driving to the site.

Customer
Pijpers Bronbemalingen, Nijkerk (NL)
Machine
E60 electric wellpoint pump, 60 m³/h
Partner
FrontControl
Connection
Teltonika FMC650 · CANbus · 4G · GNSS (GPS)
Control
Remote and on site: start/stop, modes, setpoints, schedules
Delivered
First working system within weeks
groundwater without pumping lowered groundwater discharge dry building pit wellpoints under vacuum suction line PIJPERS E60 Control cabinet FrontControl PLC · FMC650 E60 wellpoint pump electric · 60 m³/h monitoring well level sensor at the bottom iotz.io platform Pijpers team
An E60 pump lowers the groundwater around a building pit. Its own controller runs the job; iotz.io connects it to the Pijpers team, wherever they are.

The customer

About Pijpers Bronbemalingen

Pijpers Bronbemalingen has worked in the ground since 1923. The family business from Nijkerk is now run by the fourth generation. Its dewatering work ranges from a short job for a sewer connection to long projects for underground car parks, tunnels and viaducts. Pijpers also drills water wells, fire-fighting wells and geothermal loops, and builds Berliner walls.

Pijpers maintains its own equipment in its own workshop, with certified mechanics, and its staff can be reached 24/7. A company that takes this much care of its equipment wants to know how every pump is doing, at any moment.

Visit pijpersbronbemalingen.nl →

The challenge

A pump you can't see is a risk you can't manage

A dewatering pump has one job: keep the groundwater below the bottom of the excavation, day and night, for weeks or months. Most of that time nobody stands next to it.

Pijpers already measured groundwater levels remotely and kept an eye on its pumps. What they were missing was the ability to act from a distance:

  • change a pump setting without driving to the site;
  • start or stop a pump remotely;
  • see how a whole project is doing when several pumps work together;
  • one system for every pump, and later for other machines too, instead of separate software per machine type.

Every check that needs a drive costs time and fuel, and keeps a skilled person away from work that matters more.

The solution

One connected system, built around the pump

Pijpers wanted to make its pumps smarter and asked FrontControl to build a custom control unit. FrontControl selected the components, built the control around its own FrontControl PLC and programmed the pump software. Pijpers' engineering department assembled the pumps in its own workshop, using proven wellpoint pump technology from Clasal.

FrontControl then proposed to make the controller reachable from anywhere through iotz.io. We sat down with Pijpers to learn how they work and what they want to see, and built the connection, the platform and the dashboards on top of FrontControl's controller.

Pijpers

The dewatering expertise

Defined how the pumps should behave on a job and assembled them in their own workshop.

FrontControl

The machine control

Selected the control components, supplied the FrontControl PLC and programmed the pump logic.

iotz.io

The connection and the platform

Connected each pump to digital dashboards that are available anywhere, and delivered the alarms, remote control and the service behind it.

How it works

From sensor to smartphone

The schematic shows how one pump is connected. Every E60 pump in the Pijpers fleet is set up the same way, so adding a pump means installing the same parts and switching it on.

Wired CANbus Wireless (4G / GNSS) Data from the pump, commands to the pump ON SITE · PIJPERS E60 PUMP groundwater level Monitoring well pressure level sensor Vacuum pump motor · inlet valve Pump sensors flow · vacuum · temp Power meter 3-phase · kWh CONTROL CABINET FrontControl PLC runs the pump on its own 4.3″ touchscreen local control FMC650 telematics GNSS + 4G antenna CANBUS · TELEMETRY + COMMANDS GNSS satellites 4G / LTE network position 4G LTE internet IOTZ.IO PLATFORM · MANAGED BY IOTZ.IO Data history every value stored Commands checked + retried Alarm rules priority per alarm Project totals m³ + kWh per site Remote setup over the air Remote updates firmware via 4G secure web · alarms PIJPERS TEAM · OFFICE OR ON THE ROAD Pump dashboard monitor + control Project dashboard all pumps on a site alarms Email SMS Group chat
Sensors are wired to the PLC. The PLC shares its values on the CANbus, where the FMC650 telematics unit picks them up and sends them over 4G to the iotz.io platform. Commands from the dashboard travel the same way back.
  1. Sensors on the pump and in the ground

    A pressure sensor at the bottom of a monitoring well measures the groundwater level. Sensors on the pump measure flow, vacuum, temperature and the electrical supply. Everything is wired to the PLC.

  2. The PLC runs the pump

    The FrontControl PLC decides when the pump starts and stops and how hard it works, based on the water level or a set flow. A 4.3-inch touchscreen in the cabinet shows the values on site, and lets a mechanic operate the pump right there.

  3. The CANbus shares the data

    The PLC puts its values on the CANbus, the robust network that trucks, tractors and industrial machines use. The display and the telematics unit read from that same bus.

  4. The FMC650 sends it over 4G

    The telematics unit sits in the control cabinet. A combined GNSS (GPS) and 4G antenna, mounted in the optimal position for the best possible reception, sends the data and the pump's location to the iotz.io platform.

  5. The platform stores, checks and alerts

    Every value is stored. Alarm rules check it, project totals are calculated, and commands from the dashboard are sent to the pump and checked.

  6. The Pijpers team watches and acts

    On a laptop at the office or a phone on the road, with alarms by email, SMS or in a group chat.

What Pijpers sees

Dashboards designed with the people who use them

The dashboards came out of conversations with the Pijpers team, and changed with every round of feedback. The fleet overview shows every pump, the pump dashboard zooms in on one pump, and the project dashboard looks at a whole job.

The fleet overview

Every connected pump on one screen: where it is, whether it's running, in which mode, and its flow, vacuum and water level. Active alarms are at the bottom left, so the team sees straight away which pump needs attention.

Dashboards · all machinesillustrationE60-14Active alarmsWater level too highE60-14High2 min agoNo flowE60-07Cleared06:12Sent to the on-call group chat, email and SMSDewatering pumpsStatusPumpModeFlowVacuumLevelUpdatedRUNNINGE60-03Level41.2 m³/h-0.64 bar-561 cm8 sRUNNINGE60-05Level37.8 m³/h-0.61 bar-566 cm15 sALARME60-14Flow44.0 m³/h-0.70 bar-455 cm3 sRUNNINGE60-09Flow30.0 m³/h-0.58 bar-602 cm21 sSTANDBYE60-07Level0.0 m³/h-0.12 bar-583 cm11 sRUNNINGE60-11Level38.6 m³/h-0.63 bar-548 cm6 sRUNNINGE60-02Manual52.4 m³/h-0.74 bar-618 cm9 sRUNNINGE60-16Level35.1 m³/h-0.60 bar-571 cm30 sOFFE60-12Manual0.0 m³/h0.00 bar-512 cm2 min
Illustration of the fleet overview. Click a pump to open its own dashboard.

The pump dashboard

Everything about one pump: live status, history graphs, gauges and totals. It answers the first question on every call: what is that pump doing right now?

Dashboards · all machines › E60-14illustrationE60-14RUNNINGMode: level-controlled4G78 %GNSS11 satsSupply24.1 VUpdated4 s agoGroundwater level · last 24 h-460-500-540-580-62000:0006:0012:0018:00nowalarmstartstopsensor depth● actual level38.4m³/h · max 60FLOW-0.62barVACUUM64% openINLET VALVE1450rpmPUMP SPEEDPUMPED ON THIS JOB18 420 m³since 2 SepRUNNING HOURS1 236 htotalENERGY9 870 kWhtotalEnergy per day · kWhWed182Thu175Fri191Sat168Sun186Mon140Tue133
Illustration of the pump dashboard, drawn from the Pijpers setup: the level moves between the start and stop levels as the pump switches itself on and off.
Water and pump
  • Groundwater level
  • Start, stop and alarm level
  • Flow, actual and setpoint (m³/h)
  • Total volume pumped
  • Vacuum and inlet valve opening
  • Pump speed (rpm)
Electrical
  • Voltage per phase
  • Current per phase
  • Energy use (kWh)
  • Per day, week, month and year
  • Use within a chosen time window
Operation
  • Operating mode
  • Running hours
  • Ambient temperature
  • Last seen online
  • Location (GNSS/GPS)
  • Mobile signal strength

On your phone

The same dashboards work on a phone or tablet. An alarm reaches the team wherever they are, and from the same screen they check the pump, unlock the controls and switch it on or off.

illustration09:414Giotz.io · alarmnowWater level too highE60-14 · priority highAll machinesE60-14ALARM44.0 m³/h · -455 cmE60-03RUNNING41.2 m³/h · -561 cmE60-05RUNNING37.8 m³/h · -566 cmE60-09RUNNING30.0 m³/h · -602 cmE60-07STANDBY0.0 m³/h · -583 cmE60-11RUNNING38.6 m³/h · -548 cmE60-02RUNNING52.4 m³/h · -618 cmThe alarm comes to youBy SMS, email or group chat,with the pump and its priority.illustration09:414G‹ E60-03RUNNINGWater level-561 cmstartstopFlow41.2 m³/hVacuum-0.64 barModeLevelUnlocked for 15 sStartStopStart confirmed · 08:02Act from the roadCheck the level, unlockthe controls, start or stop.
Illustration of the dashboards on a phone: the alarm arrives on top of the pump list, and one pump is checked and controlled from the road.

The project dashboard

A dewatering project often runs on several pumps at once. The project dashboard groups them and shows how the job is doing as a whole: which pumps are running, how many cubic metres of water have been pumped and how much electricity that took.

That makes it easy to answer a client's question about a project, and to see the cost of running a job while it is still going.

What Pijpers controls

Fix it from where you are

Monitoring tells you something is wrong. Remote control lets you do something about it straight away. Every command below has been tested and works on the pumps today.

Start and stop

Switch a pump on or off

Straight from the dashboard, on a laptop or a phone.

On site

Or right at the pump

A mechanic at the pump uses the 4.3-inch touchscreen of the FrontControl PLC in the control cabinet. No laptop or phone needed, and the new values show up on the dashboard too.

Operating modes

Three ways to run

Level-controlled: the pump runs between a start and a stop level. Flow-controlled: it holds a set flow in m³/h. Manual: the operator decides.

Setpoints

Tune the job remotely

Change the start level, stop level, alarm level and flow setpoint when site conditions change.

Schedules

Run in time windows

Let a pump run only at set times, with separate schedules for weekdays and weekends.

Safety

No accidental changes

The controls are locked by default. A user unlocks them for a short time before changing anything.

Coming soon: setting the depth of the level sensor from the dashboard, so a new monitoring well needs no settings on site.

Dashboards · E60-14 › controlillustrationManualLevel-controlledFlow-controlledUnlockedlocks again in 0:12Stop pumpSetpointslast change: Pijpers planner · 14:02Alarm level−-460 cm+SETStart level−-540 cm+SETStop level−-580 cm+SETFlow setpoint−40 m³/h+SETCommand logTimeCommandStatus14:02Start level → -540 cmCONFIRMED13:47Mode → level-controlledCONFIRMED09:15Flow setpoint → 40 m³/hCONFIRMEDFri 17:30Schedule → weekendCONFIRMEDFri 06:58Start pumpCONFIRMED · 1 RETRYSchedule00:0006:0012:0018:0024:00Mon–Fri06:00 – 22:00Sat–Sun08:00 – 18:00
Illustration of the control page: operating mode, the lock, start/stop, setpoints, the command log and the weekly schedule.

Reliability

Built so you can trust it

The pump never depends on the connection

The PLC runs the pump on its own. If the mobile connection drops, the pump keeps working exactly as configured. Remote access is an extra layer on top of a pump that works by itself, never something the pump needs to keep running.

Alarms with priorities, sent to where people are

Each alarm has its own priority. Alarms go out by email or SMS, and to a group chat where the Pijpers team sees them together and agrees right there who takes action.

  • Water level too high
  • No flow
  • No pump speed
  • Phase failure
  • Risk of freezing
  • Level sensor fault
  • Vacuum sensor fault
  • Flow meter fault
  • Temperature sensor fault
  • Pump not responding to commands

Every command is checked

When someone switches a pump on or changes a setting, the platform watches whether the pump actually reports the new state. If it doesn't, the platform sends the command again, a few times. If the pump still doesn't confirm, an alarm goes to the right people at Pijpers. Nobody has to wonder whether the pump got the message.

Dashboard switch pump on iotz.io platform sends the command Pump PLC starts the pump Pump reports running? Confirmed dashboard: pump running Send again a few times Alarm to the team email · SMS · group chat yes no still no retry
A command counts as done only when the pump itself reports the new state back.

Secure from the pump to your phone

A pump you can switch on and off from a distance must be well protected. iotz.io is built to the requirements of the EU Machinery Regulation and the EU cybersecurity rules.

Two-factor login

Every user signs in with a password plus a second step: a code from an authenticator app or by email.

Encrypted connections

All data connections are encrypted with TLS, from the pump to the platform and from the platform to your screen.

Locked controls

The controls stay locked until a user unlocks them, and every command is recorded in the command log.

Why CANbus

One standard, every machine

CANbus is the standard network inside trucks, tractors and industrial machines, and many PLCs and machine controllers speak it. Because iotz.io connects through CAN instead of wiring sensors straight to a tracker, we read the same values the machine itself works with, and we can send commands the machine understands.

For Pijpers this was the deciding point: one generic system for all their equipment. The same approach works for their diesel-powered pumps, and for other machine types after that. One supplier, one login, one way of working.

Turnkey

A complete service, not a box of parts

Pijpers didn't want to become a telematics company, and neither do most of our customers. iotz.io takes care of everything between the PLC and the dashboard.

Remote setup

We configure every telematics unit over the air, before and after installation. No laptop on site.

Remote updates

We install firmware updates remotely, so your machines stay current without a site visit.

Connectivity

The SIM card and mobile data are part of the service. We keep an eye on every connection.

Dashboards and alarms

Designed with you, and adjusted when your way of working changes.

The project

From first meeting to working system in weeks

Pijpers and FrontControl were already working on the new pump controller when iotz.io joined. Within a few weeks the pumps were online and could be controlled remotely.

After that we went through several rounds of feedback with Pijpers. Each round, the dashboards and controls moved closer to exactly how their team wanted to see and use them. That's how we like to work: start on a real machine, listen, and improve together.

What it changes

What Pijpers can expect

The system is in use and it is too early to publish figures. These are the effects we expect, and will measure together with Pijpers:

The biggest gain

Energy savings

Fewer drives to the pumps is only the start. Because the team sees the water level and adjusts the pumps remotely, each pump can be switched on and off far more selectively. That means less noise, less wear and less energy, while the groundwater level agreed with the client is guaranteed with less risk. That saves money straight away.

Fewer site visits

Check and adjust from the office. Drive out only when a mechanic is really needed.

Faster response

An alarm arrives within moments of a problem, not on Monday morning.

No more doubt

Is it running? Is it pumping enough? The answer is on your phone.

More uptime

Problems are caught early and fixed before a pit floods.

Pijpers is now running the system on its electric E60 pumps and is already thinking about which of its other machines to bring into the same system.

Is this for you?

Your machines, visible and under control

iotz.io works best when you, or your implementation partner, are a little technical. If your machine already has a PLC or controller on a CANbus, connecting it is straightforward. If it doesn't, a partner like FrontControl can supply and program one.

Not technical at all? Talk to us anyway. We'll advise you, bring in the right partner and get your system running.

A good fit if you…

  • own machines you want to follow or control remotely;
  • have, or can get, a PLC or controller with a CANbus;
  • would rather have it built and run for you than do it yourself.

Questions

Frequently asked

Does the pump keep working without mobile coverage?

Yes. The PLC runs the pump on its own. The connection lets you watch and adjust the pump remotely, but the pump never needs it to keep working.

Do I need a specific PLC?

No. Any PLC or controller that can send and receive data on a CANbus can be connected the same way. We agree on which values and commands are shared with your PLC programmer or implementation partner.

My machine has no PLC. Can you still help?

Yes. An implementation partner such as FrontControl can supply and program a controller for your machine. We help you find the right partner and set up the full system.

Who installs the hardware?

Your own engineers or your implementation partner install the telematics unit and antenna. We configure everything remotely, before and after installation.

Can my customers watch along?

It's possible. View-only access to the pumps on their own projects can be set up per customer. Pijpers currently keeps access to its own team.

Can the pump still be operated at the pump itself?

Yes. The FrontControl PLC has a 4.3-inch touchscreen in the control cabinet. A mechanic on site can read every value and operate the pump there, and the new values also show up on the dashboard.

Does this work for diesel pumps or other machines?

Yes. The approach is the same for any machine with a controller on a CANbus: diesel pumps, generators, compressors, agricultural machines and more.

What does it cost?

You pay a fixed monthly price per connected machine. See our pricing page for current prices.

Customer: Pijpers Bronbemalingen Implementation partner: FrontControl Pump technology: Clasal